SC/gfzl.git - Gitblit

			@@ -344,7 +344,7 @@
			<NInput v-model:value="model.enabled" placeholder="请输入启用标志" />
			</NFormItem>
			<NFormItem label="到货总量" path="totalNum">
			<NInput v-model:value="model.totalNum" placeholder="请输入到货总量" />
			<NInputNumber v-model:value="model.totalNum" placeholder="请输入到货总量" class="w-full" />
			</NFormItem>
			<NFormItem label="综合判定" path="results">
			<NInput v-model:value="model.results" placeholder="请输入综合判定" />
			@@ -395,7 +395,7 @@
			/>
			</NFormItem>
			<NFormItem label="删除标志" path="deleted">
			<NInput v-model:value="model.deleted" placeholder="请输入删除标志" />
			<NInputNumber v-model:value="model.deleted" placeholder="请输入删除标志" class="w-full" />
			</NFormItem>
			<NFormItem label="批次描述" path="batchDes">
			<NInput v-model:value="model.batchDes" placeholder="请输入批次描述" />
			@@ -413,13 +413,13 @@
			<NInput v-model:value="model.boxno" placeholder="请输入装箱号" />
			</NFormItem>
			<NFormItem label="父批次号" path="pid">
			<NInput v-model:value="model.pid" placeholder="请输入父批次号" />
			<NInput v-model:value="model.pid as any" placeholder="请输入父批次号" />
			</NFormItem>
			<NFormItem label="复核人" path="reviewer">
			<NInput v-model:value="model.reviewer" placeholder="请输入复核人" />
			</NFormItem>
			<NFormItem label="复检次数" path="rvcount">
			<NInput v-model:value="model.rvcount" placeholder="请输入复检次数" />
			<NInputNumber v-model:value="model.rvcount" placeholder="请输入复检次数" class="w-full" />
			</NFormItem>
			<NFormItem label="批次状态" path="state">
			<NInput v-model:value="model.state" placeholder="请输入批次状态" />